Friday, April 20, 2012

Well worth the weight

Ohh lordy I have been suffering, yes indeed.  The human race, with all its innovation and technologies.  In its unyielding, unwavering, and unstoppable crusade in the name of progress............
This spectacular species is still unable to make a great mountain bike pedal.  Oh sure there are mediocre pedals and certainly a lot of total crap-ola pedals.  But nothing that really represents the brilliance that we are capable of.  And while my own personal quest to find the One Great Pedal continues without success I am, for the time being, willing to lower my standards a little and settle for the One Good Pedal.

After suffering for a couple years on the Look Quartz I went back to the trusted Shimano XTR and life is good.  The only thing stopping the 980 XTR from being great is that they are about 80 grams per pair too heavy.  This is actually a considerable margin but the weight is offset by how well they function.
The XTR 980 pedals are good, not great.  But certainly better than terrible which is what the Quartz are.



So there you go.  The 980 XTR pedals are the best on the market.  Don't even say the word Eggbeater around me.
Benno

Thursday, April 19, 2012

Accidentally did the ride I wanted to do

Wasn't planning on doing it today but I guess Pisgah isn't that huge.  I mean it's massive but manageable.  Started at a place called Turkey Pen and ended up riding all the way over to Black Mountain and back again.  I had looked at this ride earlier and figured I would do it on my own and it would be 5-6 hours.  Turns out it is really only around 3 hours and a decent pace. It actually laid the groundwork for a very awesome 5 or 6-ish hour epic ride for next year utilizing many of the most grueling trails Pisgah has to offer.  So if you think you are up to the challenge then look forward to joining me on this ride next year.

Here is a look at what we did today.  Can't argue with that elevation profile.



The riding here has been great this year and I am looking forward to coming back to Ontario very shortly!
Benno

Wednesday, April 18, 2012

How - To: Install/Remove pedals (like a boss)

Today I am going to show you how to remove and install pedals on your bike.  This job can be quite a pain (literally) if they are stuck on there either by being installed with too much torque or being seized from corrosion.  Trying to break a pedal loose with your hands will often result in slicing the crap out of your hand on your chainring which doesn’t feel very good.

Tools required
-Allen key or wrench
-general purpose grease

Step 1:
Determine which size Allen key or wrench fits the pedal.  Pedals can have a spot for an Allen key on the backside of the axle or they can have a flat spot for a wrench on the axle between the body of the pedal and the crank arm.  Sometimes a pedal can even have both.  Go for the larger, heftier interface so there is less chance of stripping the pedal or the tool you are using.

Step 2:
Find a nice flat wall to prop your bike against.  It is always best to have your bike contacting the wall in at least 2 places, I usually have it touching in 3 places.  The saddle, the back tire, and the end of the handlebar.  That way it is more stable.

Step 3:
Position your crank arm so that the pedal is at the bottom of the stroke.  Place the tool on the spindle of the pedal so that it is mostly perpendicular to the angle of the crank. 
*Remember each pedal side has different threading.  An easy way to remember which direction will loosen a pedal - when you try to loosen the pedal the cranks will want to spin (freewheel) on you.

Step 4:
This is the most dangerous part requiring co-ordination. 
-Grab your rear brake so the bike doesn’t move
-Step on the pedal with one foot
-Place the other foot on the tool
-Push down with both feet to crack the pedal loose

A view of what my feet are doing

A view from the top.  Remember to hold the brake so the bike doesn't move.

Step 5:
Now that the pedal has been broken free you can spin it the rest of the way out.

Step 6:
Clean up the threads and dab on some grease for re-installation


Step 7:
Clean up the threads on the crank

Step 8:
Carefully thread the pedal back into the crank making sure not to cross thread.  Since tightening the pedal will try to move the back wheel just squeeze the back brake while you tighten it down to about an 8 out of 10 on the perceived exertion scale.

If you can't remove a pedal this way then your next step is a drill press ;-)
Benno